Got a code from a scan tool? Type it below to see what it means, how serious it is, what usually causes it, and what the repair typically costs. Works with any P, B, C or U code.
How to read your check engine code
Plug an OBD-II scanner into the port under the dashboard (usually left of the steering column), turn the key to On, and read the stored codes. Many auto parts stores will do this for free. Write down every code, not just the first one; codes stored together often share a cause. Fix the cheapest, most common cause first, clear the code, and drive a few days to see if it returns.
Frequently asked questions
What is an OBD2 code?
It’s a diagnostic trouble code your car’s computer stores when it detects a fault. Every car sold in the US since 1996 uses the same OBD2 system. A code has one letter (P for powertrain, B for body, C for chassis, U for network) followed by four digits, such as P0420.
Where is the OBD2 port on my car?
It’s a 16-pin trapezoid-shaped socket under the dashboard on the driver’s side, usually within a foot or two of the steering wheel. On some cars it’s behind a small cover, near the fuse panel, or by the center console.
How can I read my code for free?
Many US auto parts stores will scan your car for free in the parking lot. Alternatively, a basic Bluetooth OBD2 scanner costs about $20 to $40 and works with a free phone app.
Can I keep driving with the check engine light on?
If the light is steady, you can usually drive for a short time but should have the code read soon. If it’s flashing, stop driving as soon as it’s safe: a flashing light means a misfire that can destroy the catalytic converter within minutes. Red warning lights for oil pressure or temperature always mean stop.
Will clearing the code fix the problem?
No. Clearing only erases the record. If the fault is still there, the light comes back, often within a few drives. Clearing also resets the emissions readiness monitors, so the car may fail an emissions test until you’ve driven enough for them to complete again.
What’s the difference between P0, P1 and P2 codes?
P0 and P2 codes are generic: they mean the same thing on every make. P1 codes are manufacturer-specific, so P1450 means one thing on a Ford and something else on a Toyota. Always look up P1 codes together with your car’s make.
Why do I have several codes at once?
They often share one root cause. A vacuum leak can trigger P0171 and P0300 together; a weak battery can trigger a string of U codes. Fix the shared cause first, clear the codes, and see which ones return.
What do “Bank 1” and “Sensor 1” mean?
Bank 1 is the side of the engine with cylinder number 1; Bank 2 is the other side, so only V6, V8 and flat engines have one. Sensor 1 is the oxygen sensor before the catalytic converter (upstream); Sensor 2 is after it (downstream).