Not sure what’s wrong with your car? Answer two quick questions and this free tool narrows it down to the most likely causes, tells you how urgent it is, and points you to the right step-by-step guide. No sign-up needed.
What could be wrong with my car?
Most car problems show up as one of five things: a noise, a smell, a warning light, a change in how the car drives, or a car that won’t start. Pinning down which one you have, and exactly when it happens, is most of the diagnosis.
- Noises: a grinding noise when braking, a clicking noise when turning, or a car that clicks but won’t start.
- Smells: a car that smells like gas or an AC that smells musty.
- Warning lights: the ABS light, the brake warning light, the battery light, or the oil pressure light. For a check engine light, look up the code in the OBD2 Code Lookup.
- How the car drives: a car that shakes when braking at high speed, a car pulling to one side, or a car that jerks when accelerating.
- Won’t start: a car that won’t start but the lights work or a car that won’t start with no lights.
- Heating and AC: an AC not blowing cold air or a heater blowing cold air.
How to use the symptom checker
- Start with the symptom you notice most clearly.
- Note when it happens: with the engine cold or warm, at a certain speed, when braking, or when turning.
- Open the guide for the most likely cause and try its simple checks first.
- If a warning light is on, read the code with a scanner and look it up in the OBD2 Code Lookup.
When to stop and get help
Stop driving and have the car checked if you see a red warning light, the brake pedal feels soft or sinks, you smell fuel or see smoke, or the temperature gauge reaches the red.
How this tool works
The checker matches your symptom against the most common causes reported by mechanics and manufacturer service information. Results are general guidance, not a diagnosis. If you get a red ‘stop driving’ result, pull over safely and call for help.
Frequently asked questions
How accurate is this symptom checker?
It points you to the most common causes of each symptom, based on what mechanics see most often and manufacturer service information. It’s a starting point, not a diagnosis. The same symptom can have several causes, so a mechanic still needs to confirm the fault before parts are replaced.
What should I do if I get a red “stop driving” result?
Pull over as soon as it’s safe, switch off the engine, and don’t restart it. Red results cover faults that can cause an accident or destroy the engine: brake failure, low oil pressure, overheating, a strong fuel smell, and a flashing check engine light. Call for a tow rather than risking it.
My symptom isn’t listed. What now?
Pick the closest match, or try a different starting category; many problems fit more than one. If the check engine light is on, read the code with a scanner and use our OBD2 Code Lookup instead. You can also email us through the Contact page and we may add your symptom.
Does this replace a scan tool?
No. If your check engine light is on, the stored code will narrow the problem down far more precisely than symptoms alone. Many auto parts stores will read it for free, or a basic Bluetooth scanner costs about $20 to $40.
How much does a diagnosis cost at a repair shop?
In the US, most shops charge a diagnostic fee of roughly $80 to $150, about one hour of labor. Many will apply that fee toward the repair if you have them do the work.
Is the symptom checker free, and do you store my answers?
It’s free, there’s no sign-up, and it runs entirely in your browser. Your answers are never sent to us or stored anywhere.